Compact Tapping Center (High Speed Model)

TX-1000
Compact Tapping Center (High Speed Model)
TX-500-700-1000
 TX-500TX-700TX-1000
Travel For 3-Axes
X-Axis Travel mm 500 700 1000
Y-Axis Travel mm 400 400 500
Z-Axis Travel mm 330 330 350
Spindle Nose To Workable Surface mm 170 - 500 170 - 500 150 - 500
Spindle
Spindle Speed rpm 12000 12000 12000
Automatic Tool Changing System
Number Of Tools one of a pair 21 21 21
Max. Tool Diameter ( No Adjacent Knife ) mm 60 / 80 60 / 80 60 / 80
Max. Tool Length mm 250 250 250
Max. Tool Weight kg 3 3 3
Tool Changing Method 　 Disc Type Disc Type Disc Type
Tool Specifications 　 BT-30 BT-30 BT-30
Motor
Spindle Motor (Continuous/30min. Rated) kw ( HP ) 3.5 / 5.5 3.5 / 5.5 3.5 / 5.5
Motors On X/Y/Z-Axis kw 1.5 / 1.5 / 2.2 1.5 / 1.5 / 2.2 1.5 / 1.5 / 2.2
Worktable
Worktable Area mm 650 x 400 850 x 400 1100 x 500
Worktable Max. Load Capacity kg 250 250 350
T-Slot (Number X Width X Distance From The Center) mm 3 x 14 x 125 3 x 14 x 125 3 x 14 x 125
Rapid Speed
X-Axis Rapid Speed M/min 48 48 48
Y-Axis Rapid Speed M/min 48 48 48
Z-Axis Rapid Speed M/min 48 48 48
Cutting Feed Rate mm/min 1 - 20000 1 - 20000 1 - 30000
Controller
Mitsubishi 　 M80 M80 M80
Miscellaneous
Machine Weight kg 3000 3500 4100
Power Consumption KVA 15 15 15
Coolant Tank Capacity L 200 200 300
Compressed Air Source kg/cm2 6 6 6
  • Standard
  • Options
  • Upon Request
  • Spindle
    • Spindle Speed 12000RPM
    • Spindle Speed 24000RPM
    • Spindle Oil Cooler
    • Coolant Through Spindle
    • Spindle Air Blow Device
    • Rigid Tapping
  • Controller
    • Mitsubishi M80
    • Mitsubishi M830S
    • FANUC 0iMD
  • Cooling System
    • Coolant Cooling System
    • Spindle External Programmable Air Blow System
  • Chip Removal
    • Cutting Fluid System
    • Top Hood Protection Cover
    • Side Punching Device
    • Fixture Cleaning Device
    • Cleaning Water Gun
    • Cleaning Wind Gun
    • Full Enclosure Cover (Panel)
    • Slideway Protection Cover X / Y / Z
  • Measuring System
    • Infrared Tool Breakage Detection
    • Workpiece Measurement System
    • Tool Length Measurement System
  • Oil/Coolant Separator
    • Disc Type Oil/Coolant Separator
  • Lubrication System
    • Central Lubrication System
    • Manual Grease Lubrication
    • Automatic Grease Lubrication
    • Automatic Lubricating Oil Lubrication
  • ATC Tool Changing
    • ATC Magazine Tool Number 16T
    • ATC Magazine Tool Number 21T
    • Tool Specifications BT-30
    • Tool Specifications CAT Or Others
    • Automatic Tool Change System
    • Servo Magazine
  • Electrical
    • Front Door Safety Door Device
    • Worklight
    • Alarm Light
    • Heat Exchanger
    • Transformer Unit
    • M30 Automatic Power Off System
    • Front LED Light
  • Miscellaneous
    • DDR Embedded Motor (4th Axis)
    • 4th Axis (Rotating Table)
    • Tooling
    • CE Specifications
    • Raised Column 100 mm
    • Raised Column 200 mm
    • Automatic Door
    • Base Bolts And Pads
    • Tool Box
    • Oil Mist Collector
    • Tailstock Support
    • Shock Absorption Foot Pads
Contact