Vertical Machining Center (Double Columns Gantry)
LG-600
Travel
X Axis Travel+Tool Change Travel mm 600+200
Y-Axis Travel mm 470
Z-Axis Travel mm 350
Spindle
Spindle Speed rpm 15000
Rapid Speed
X-axis Rapid Speed m/min 30
Y-axis Rapid Speed m/min 30
Z-axis Rapid Speed m/min 24
Automatic Tool Changing System
Number of Tools One of A Pair 24T
Max. Tool Diameter mm 75/150(24T) 75/127(32T)
Max. Tool Length mm 300
Max. Tool Weight kg 7
Tool Exchange Method Arm
Tool Type HSK63A
Motor
Spindle Motor Kw 15/18.5/22
Motors on X/Y/Z-Axis Kw 3.5/3.5/3.5
Worktable
Table Size mm 750x450
Table Load Capacity kg 500
Controller
Mitsubishi M830
Miscellaneous
Machine Weight kg 7970
Power Reqirement KVA 25
Coolant Tank Capacity L 340
Air Pressure Requirement kg / cm3 6
  • Standard
  • Options
  • Upon Request
  • Spindle
    • Spindle Speed 15000 RPM(Direct Drive)
    • Spindle Speed 20000 RPM(Direct Drive)
    • Spindle Oil Cooler
    • Coolant Through The Spindle System(CTS)
    • Spndle Oil-Air Lubrication (For High-Speed Cuttiong)
  • Cooling System
    • Programmable Air Blowing System Outside
    • Spindle Internal Ring Spray
    • Cutting Fluid Cooling System
  • Chip Removal System
    • Chip Conveyor
    • Chip Flushing Device
    • Coolant Tank Tilter System
  • Measurement System
    • Infrared Tool Break Detector
    • Tool Length Measurement System
    • Workpiece Measurement System
  • Oil-Water Separator
    • Disc-Type Oil-Water Separator
  • ATC System
    • Automatic Tool Changing Mechanism(ATC)
    • Tool Specifications HSK63A
    • Arm Type Tool Magazine 24T
    • Arm Type Tool Magazine 32T
  • 3-Axes Transmission System
    • Coolant Thru Ballscrew
    • Spindle And Three-Axis Mor Plate Cooling
    • 3-Axes Linear Scale
    • Thre Axis Orller Guide
  • Controller
    • Mitsubishi M830
    • Siemens 840D
    • FANUC 31i-B
  • Electrical Parts
    • Working Lamp
    • Alarm Indicator
    • Spotlight Lightiong
    • M30 Auto Power Off System
    • Electric Cabinet Cooling System
  • Others
    • Oil Demiter System
    • 4th/5th Axis (Rotary Axis)
Contact