Research initiative

Design and Development

To ensure that the new products completed in the development meet the market requirements as well as the needs of customers, Litz Hitech has regulated relevant procedures to standardize the product design and development process, effectively mastering the operational progress, controlling the quality of development and assuring the product performance.

Customer satisfaction

  • From the product development plan, specifications setup, design operations, prototype machine trial to volume production, the R & D department takes strict control to ensure the product can meet customer needs.
  • After the completion of each product, going under the process of design, overall planning design and trial operation, all design verifications and confirmations must be implemented to assure that the new product meets the design input requirements.
  • The R&D department has introduced the 3D solid model construction design, greatly reducing the number of model trials, modification time and cost, enabling the product’s look to be confirmed as early as possible; meanwhile, accelerating product launch or delivery time.
Design and Development_1
Design and Development_2
Design and Development_3

Technical indicators

Precision mold processing

Precision mold processing

Processing engineering: Lamp mold
Materials to be cut:SKD-61
Materials to be cut: 92 x 50 x 35mm
Dry cutting

Cutting conditions (standard machine)

ToolsRevolution(s)
(RPM)
Cutting speed
(m/min)
Feed rate
(mm/min)
Cutting depth
(mm)
Time
(min)
¢10 End cutter 2860 89 800 1 27
¢10 End cutter 2280 71 320 0.1 8
R4 Ball knife 3600 90 720 0.2 10
R2 Ball knife 8000 100 2600 0.5 19
R1 Ball knife 8000 50 1600 0.1 233
Cutting conditions (DM-600)

Cutting conditions (DM-600)

ToolsRevolution(s)
(RPM)
Cutting speed
(m/min)
Feed rate
(mm/min)
Cutting depth
(mm)
Time
(min)
¢10 End cutter 2860 89 800 1 27
¢10 End cutter 2280 71 320 0.1 8
R4 Ball knife 3600 90 720 0.2 10
R2 Ball knife 8000 100 2600 0.5 19
R1 Ball knife 24000 150 3300 0.1 120

Fine pore processing

Fine pore processing

Drilling diameter:¢0.15m/m
Number of drilling holes:497 holes
Board thickness:1m/m

Cutting conditions

ToolsRevolution(s)
(RPM)
Cutting speed
(m/min)
Feed rate
(mm/min)
Cutting depth
(mm)
Time
(min)
¢0.15mm diller 24000 11 380 0.1 75

Precision processing

Precision processing

Processing engineering:Engraving copper pole
Materials to be cut:copper
Dimension of materials: 35 x 35 x 35mm
Dry cutting

Cutting conditions

ToolsRevolution(s)
(RPM)
Cutting speed
(m/min)
Feed rate
(mm/min)
Cutting depth
(mm)
Time
(min)
¢10 End cutter 8000 150 2400 0.5 6
R3 Ball knife 12000 226 2400 0.1 6
90° Carving Knife 24000 188 1200 0.2 12
Contact