Vertical Machining Center
CV-3000
Travel
X-Axis Travel (Left and Right Worktable) mm 3000
Y-Axis Travel (Front and Back Column) mm 1000
Z-Axis Travel (Up and Down Spindle) mm 750
Spindle Nose To Table Surface mm 150-900
Worktable
Table Size mm 3250x800
T-Slot (No. X Width X Distance From The Center) mm 5x18x150
Table Height mm 1075
Maximum Load Capacity kg 3000
Spindle
Max. Spindle Speed RPM 6000
Spindle Taper   7/24 Taper,No.50
Tool Clamping Force KN 18
Automatic Tool Change (ATC)
Tool Shank   ISO 50 or BT-50
Magazine Station 24
Maximum Tool Diameter (Without Adjacent Tool) mm 125 (250)
Maximum Tool Length mm 350
Maximum Tool Weight kg 15
Atc Type   ARM
Feed Rate
X / Y / Z Axis Rapid Speed M/min 15/12/15
Cutting Feed Rate mm/min 1-8000
Jog Feed Rate mm/min 1260
Motor
Spindle Motor (Cont./30 Min.) KW 15/18.5
Axes Motor X / Y / Z KW 4/4/9
Power
Power Requirement KVA 45
Air Source kg/cm2 6
Oil/Coolant Tank Capacity
Machine Weight L 400
Power Requirement L 4
Controller
FANUC   0iMD-A
Machine Size
Machine Height mm 3778
Floor Space mm 7410x5360
Machine Weight kg 25000
  • Standard
  • Options
  • Upon Request
  • Spindle
    • Spindle Speed 6000RPM
    • Spindle Speed 8000RPM
    • Spindle Oil Cooler
    • Coolant Through Spindle (Cts)
    • Spindle Air Seal System
    • Spindle Head Coolant Cooling System
  • Cooling System
    • Spindle External Programmable Air Blow System
    • Stop Block For Oil Feed Tool Holder
    • Programmable Coolant Nozzle
    • Splash Ring (Arm Type Only )
    • Coolant Cooling System
  • Chip Removal
    • Chip Auger Inside The Machine
    • Scraper Chip Removing Machine
    • Chip Cart
    • Water Gun
    • Air Gun
    • Wash Down Device
    • Hood For The Top Of The Machine
    • Full Enclosure
  • Measuring System
    • Infrared Tool Breakage Detection
    • Tool Length Measurement System
    • Workpiece Measurement System
  • Oil/Coolant Separator
    • Disc Type Oil/Coolant Separator
    • Machine Oil/Coolant Separation System
  • ATC System
    • Automatic Tool Changer Mechanism (ATC)
    • Taper BT-50
    • Other Specifications ( NBT.BBT.CAT... )
    • Arm Type Tool Magazine 32T
    • Arm Type Tool Magazine 24T
  • 3 Axes Transmission
    • (Ctb) 3-Axes Coolant Thru Ballscrew
    • Z Axis Hard Rail
    • X, Y Roller Type Linear Guideways
    • 3 Axes Linear Scales
    • Z Axis Motor System W/ Brake
  • Electrical
    • Worklight
    • Alarm Light
    • M30 Automatic Power Off System
    • Heat Exchanger
    • Air Conditioner
  • Miscellaneous
    • ZF Gearbox
    • 4th Axis (Rotating Table)
    • Tooling
Contact