Vertical Machining Center
CV-2000BG
Travel For 3-Axes
X-Axis Travel mm 2000
Y-Axis Travel mm 900
Z-Axis Travel mm 800
Spindle Nose To Workable Surface mm 100-900
Spindle
Spindle Speed rpm 6000
Automatic Tool Changing System
Number of Tools one of a pair 24
Max. Tool Diameter mm 240
Max. Tool Length mm 350
Max. Tool Weight kg 15
TTool Changing Method   ARM
Tool Specifications   BT-50
Motor
Spindle Motor (Continuous/30min. Rated) kw (HP) 15/18.5 (20/25)
Motors On X/Y/Z-Axis kw 4.5/4.5/4.5
Worktable
Worktable Area mm 2100x850
Worktable Max. Load Capacity kg 3000
T-Slot (Number X Width X Distance From The Center) mm 7x18x100
Rapid Speed
X-Axis Rapid Speed M/min 20
Y-Axis Rapid Speed M/min 20
Z-Axis Rapid Speed M/min 15
Cutting Feed Rate mm/min 1-8000
Controller
Mitsubishi   M70
Miscellaneous
Machine Weight kg 21000
Power Consumption KVA 40
Coolant Tank Capacity L 550
Compressed Air Source kg/cm2 6
  • Standard
  • Options
  • Upon Request
  • Spindle
    • Spindle Speed 6000RPM
    • Spindle Oil Cooler
    • Coolant Through Spindle (Cts)
    • Spindle Air Seal System
  • Cooling System
    • Spindle External Programmable Air Blow System
    • Stop Block For Oil Feed Tool Holder
    • Programmable Coolant Nozzle
    • Splash Ring (Arm Type Only )
    • Coolant Cooling System
  • Chip Removal
    • Chip Auger Inside The Machine
    • Chip Conveyor
    • Chip Cart
    • Water Gun
    • Air Gun
    • Wash Down Device
    • Hood For Worktable (Half)
    • Full Enclosure
  • Measuring System
    • Infrared Tool Breakage Detection
    • Tool Length Measurement System
    • Workpiece Measurement System
  • Oil/Coolant Separator
    • Disc Type Oil/Coolant Separator
    • Machine Oil/Coolant Separation System
  • ATC System
    • Automatic Tool Changer Mechanism (ATC)
    • Other Specifications ( NBT.BBT.CAT... )
    • Arm Type Tool Magazine 24T
    • Taper BT-50
  • 3 Axes Transmission
    • (Ctb) 3-Axes Coolant Thru Ballscrew
    • X, Y Roller Type Linear Guideways
    • 3 Axes Linear Scales
    • Z Axis Motor System W/ Brake
    • Z Axis With Linear Guide Way
  • Electrical
    • Worklight
    • Alarm Light
    • M30 Automatic Power Off System
    • Heat Exchanger
    • Air Conditioner
    • Front Door Safety System
  • Miscellaneous
    • 4th Axis (Rotating Table)
    • 2-Speed Gearbox
Contact