Vertical Machining Center
CV-1600BG
Travel For 3-Axes
X-Axis Travel mm 1600
Y-Axis Travel mm 900
Z-Axis Travel mm 800
Spindle Nose To Workable Surface mm 100-900
Spindle
Spindle Speed rpm 6000
Automatic Tool Changing System
Number Of Tools 24
Max. Tool Diameter mm 240
Max. Tool Length mm 350
Max. Tool Weight kg 15
Tool Changing Method   Arm
Tool Specifications   BT-50
Motor
Spindle Motor (Continuous/30min. Rated) kw (HP) 15/18.5 (20/25)
Motors On X/Y/Z-Axis kw 3.5/3.5/3.5
Worktable
Worktable Area mm 1700x850
Worktable Max. Load Capacity kg 2000
T-Slot (Number X Width X Distance From The Center) mm 7x18x100
Rapid Speed
X-Axis Rapid Speed M/min 20
Y-Axis Rapid Speed M/min 20
Z-Axis Rapid Speed M/min 15
Cutting Feed Rate mm/min 1-8000
Controller
Mitsubishi   M70
Miscellaneous
Machine Weight kg 19000
Power Consumption KVA 40
Coolant Tank Capacity L 500
Compressed Air Source kg/cm2 6
  • Standard
  • Options
  • Upon Request
  • Spindle
    • Spindle Speed 6000RPM
    • Spindle Oil Cooler
    • Coolant Through Spindle (Cts)
    • Spindle Air Seal System
  • Cooling System
    • Spindle External Programmable Air Blow System
    • Stop Block For Oil Feed Tool Holder
    • Programmable Coolant Nozzle
    • Splash Ring (Arm Type Only )
    • Coolant Cooling System
  • Chip Removal
    • Chip Auger Inside The Machine
    • Chip Conveyor
    • Chip Cart
    • Water Gun
    • Air Gun
    • Wash Down Device
    • Hood For Worktable (Half)
    • Full Enclosure
  • Measuring System
    • Infrared Tool Breakage Detection
    • Tool Length Measurement System
    • Workpiece Measurement System
  • Oil/Coolant Separator
    • Disc Type Oil/Coolant Separator
    • Machine Oil/Coolant Separation System
  • ATC System
    • Automatic Tool Changer Mechanism (ATC)
    • Other Specifications ( NBT.BBT.CAT... )
    • Arm Type Tool Magazine 24T
    • Taper BT-50
  • 3 Axes Transmission
    • (Ctb) 3-Axes Coolant Thru Ballscrew
    • X, Y Roller Type Linear Guideways
    • 3 Axes Linear Scales
    • Z Axis Motor System W/ Brake
    • Z Axis With Linear Guide Way
  • Electrical
    • Worklight
    • Alarm Light
    • M30 Automatic Power Off System
    • Heat Exchanger
    • Air Conditioner
    • Front Door Safety System
  • Miscellaneous
    • 4th Axis (Rotating Table)
    • 2-Speed Gearbox
Contact