Vertical Machining Center
CV-1200B
Travel For 3-Axes
X-Axis Travel mm 1200
Y-Axis Travel mm 600
Z-Axis Travel mm 675
Spindle Nose To Workable Surface mm 100 - 775
Spindle
Spindle Speed rpm 6000
Automatic Tool Changing System
Number of Tools one of a pair 24
Max. Tool Diameter mm 80/125
Max. Tool Length mm 300
Max. Tool Weight kg 15
Tool Changing Method   ARM
Tool Specifications   BT - 50
Motor
Spindle Motor (Continuous/30min. Rated) kw ( HP ) 15 / 18.5 ( 20 / 25 )
Motors On X/Y/Z-Axis kw 3.5 / 3.5 / 3.5
Worktable
Worktable Area mm 1220 x 620
Worktable Max. Load Capacity kg 1200
T-Slot (Number X Width X Distance From The Center) mm 5 x 18 x 100
Rapid Speed
X-Axis Rapid Speed M / min 24
Y-Axis Rapid Speed M / min 24
Z-Axis Rapid Speed M / min 18
Cutting Feed Rate mm / min 1 - 20000
Controller
Mitsubishi   M80
Miscellaneous
Machine Weight kg 9000
Power Consumption KVA 35
Coolant Tank Capacity L 360
Compressed Air Source kg / cm2 6
  • Standard
  • Options
  • Upon Request
  • Spindle
    • Spindle Speed 6000RPM
    • Spindle Speed 10000RPM
    • Spindle Oil Cooler
    • Coolant Through Spindle (CTS)
    • Spindle Air Seal System
    • Spindle Head Coolant Cooling System
  • Cooling System
    • Spindle External Programmable Air Blow System
    • Stop Block For Oil Feed Tool Holder
    • Programmable Coolant Nozzle
    • Splash Ring (Arm Type Only )
    • Coolant Cooling System
  • Chip Removal
    • Chip Auger Inside The Machine
    • Chip Conveyor
    • Chip Cart
    • Water Gun
    • Air Gun
    • Wash Down Device
    • Hood For Worktable (Half)
    • Full Enclosure
    • Hood For The Top Of The Machine
  • Measuring System
    • Infrared Tool Breakage Detection
    • Tool Length Measurement System
    • Workpiece Measurement System
  • Oil/Coolant Separator
    • Disc Type Oil/Coolant Separator
    • Machine Oil/Coolant Separation System
  • ATC System
    • Automatic Tool Changer Mechanism (ATC)
    • Taper BT-50
    • Arm Type Tool Magazine 24T
    • Carousel Type Tool Magazine 30T
    • Carousel Type Tool Magazine 32T
    • Carousel Type Tool Magazine 40T
  • 3 Axes Transmission
    • 3-Axes Coolant Thru Ballscrew ( CTB )
    • 3 Axes Roller Type Linear Guideways
    • 3 Axes Linear Scales
    • Z Axis Motor System W/ Brake
    • Z Axis With Linear Guide Way
  • Control
    • Mitsubishi M80
    • FANUC
    • Siemens 828D
  • Electrical
    • Worklight
    • Alarm Light
    • M30 Automatic Power Off System
    • Heat Exchanger
    • Air Conditioner
    • Front Door Safety System
  • Miscellaneous
    • 4th Axis (Rotating Table)
    • Tooling
    • ZF Gearbox
    • DDR Embedded Motor (Mitsubishi System Only)
Contact