Horizontal Machining Center
LH-630A
Travel
Travel, X/Y/Z mm 1000/850/950
Spindle Center To Pallet Face mm 100-950
Spindle Nose To Pallet Center mm 150-1100
Pallet
Pallet Size mm 630x630
Maximum Workpiece mm Ø 1000
Maximum Pallet Load kg 1000
Maximum Workpiece Height mm 1000
Pallet Surface Configuration mm 24-M16 Pitch 125
Pallet Indexing  
Spindle
Spindle Max. Speed RPM 10000
Low/Hight Gear Variation RPM 6000
Spindle Max. Torque ( Standard ) N-m 165
Spindle Taper   7/24 Taper , NO.40
Spindle Bearing Id mm 70
Spindle Transmission   Direct
Feed Rate
Max. X/Y/Z Rapid Speed mm/min 32000
Cutting Feed Rate mm/min 1-10000
Job Feed Rate mm/min 1260
Automatic Tool Change (ATC)
Type Of Tool Shank   ISO 40 or BBT-40
Tool Capacity one of a pair 60
Max. Tool Diameter (Without Adjacent Tool) mm 80(160)
Max. Tool Length mm 450
Max. Tool Weight kg 8
ATC Changing Time ( T to T ) sec. 5
Tool Selection Method   Fixed Address
Automatic Pallet Changer (APC)
Number of Pallets one of a pair 2
Pallet Changing Type   Rotary Type
Time For APC sec. 18
Controller System
FANUC   0i-MF
Motor
Spindle Motor, Power KW 22/26
Spindle Motor N.m 165
X/Y/Z/B Axis Motor KW 7 / 7 / 7 / 3
Motor, Hydraulic System KW 2.2
Motor, Coolant Pump System KW 1.6
Power Supply
Power Requirement  KVA 42
Capacity Of Oil/Coolant Tank
Capacity, Hydraulic System L 60
Capacity, Lubrication System L 4
Capacity, Coolant System L 800
Mechanical Specifications
Height mm 3362
Floor Area mm 5966x3570
Weight kg 23000
  • Standard
  • Options
  • Upon Request
  • Spindle
    • Direct Spindle Speed 10000 RPM
    • Spindle Oil Cooling System
    • Spindle Air Seal System
    • Spindle Direct Transmission
  • 3-Axis Transmission System
    • 3-Axis Roller Linear Rail
    • 3-Axis Hollow Ballscrew Cooling System
    • 3-Axis Linear Scale System
    • 4th Axis Encoder
  • Pallet Unit
    • Pallet 1 ˚division
    • Pallet 0.001 ˚ Division
    • Pallet M16 Fixing Holes
    • Pallet T-Slot
  • Cooling System
    • Splash Ring
    • Spindle Air Blow System
    • Coolant Through Spindle (CTS)
  • Chip Removal System
    • Track Type Chip Conveyer System
    • Chip Cart
    • Indoor Chip Auger
    • Mechanical Oil-Coolant Separator
    • Overhead Chip Wash-Down System
    • Disc-Type Coolant Separator
  • Safety System
    • Front Door / Side Door Safety Switch
    • CE Safety Specifications
  • Measuring System
    • Tool Length Measuring System NC - 4S
    • Workpiece Measuring System RMP - 60
    • Tool Breakage Detection (Magazine)
  • ATC And Magazine System
    • Tool Storage Capacity 60 T
    • Tool Specification BBT
    • Tool Specification CAT
    • Tool Specification NO.40
  • Electrical
    • M30 Automatic Power-Off System
    • Working Light (Lighting)
    • Warming Light
    • Electrical Cabin Air-Condition System
    • Electrical Cabin Heat Exchange System
  • Controller
    • FANUC 31i
    • FANUC 0iMF
  • Others
    • Oil Mist Collector Unit
    • Rotary Window
Contact