Vertical Machining Center
MV-1600A
Travel For 3-Axes
X-Axis Travel mm 1600
Y-Axis Travel mm 800
Z-Axis Travel mm 740
Spindle Nose To Workable Surface mm 100 - 840
Spindle
Spindle Speed rpm 8000
Automatic Tool Changing System
Number of Tools one of a pair 30
Max. Tool Diameter (With Adjacent Tool / Without Adjacent Tool) mm 80 / 125
Max. Tool Length mm 300
Max. Tool Weight kg 7
Tool Changing Method   Arm
Tool Specifications   BT-40
Motor
Spindle Motor (Continuous/30min. Rated) kw ( HP ) 15 / 18.5 ( 20 / 25 )
Motors On X/Y/Z-Axis kw 3.5 / 3.5 / 3.5
Worktable
Worktable Area mm 1700 x 800
Worktable Max. Load Capacity kg 1600
T-Slot (Number X Width X Distance From The Center) mm 7 x 18 x 100
Rapid Speed
X-Axis Rapid Speed M/min 20
Y-Axis Rapid Speed M/min 20
Z-Axis Rapid Speed M/min 18
Cutting Feed Rate mm/min 1 - 8000
Controller
Mitsubishi   M80
Miscellaneous
Machine Weight kg 14500
Power Consumption KVA 40
Coolant Tank Capacity L 500
Compressed Air Source kg/cm2 6
  • Standard
  • Options
  • Upon Request
  • Spindle
    • Spindle Speed 8000RPM
    • Spindle Speed 10000RPM
    • Spindle Speed 12000RPM
    • Spindle Oil Cooler
    • Coolant Through Spindle (CTS)
    • Spindle Air Seal System
    • Spindle Head Coolant Cooling System
  • Cooling System
    • Spindle External Programmable Air Blow System
    • Stop Block For Oil Feed Tool Holder
    • Programmable Coolant Nozzle
    • Splash Ring (Arm Type Only)
    • Coolant Cooling System
  • Chip Removal
    • Chip Auger Inside The Machine
    • Chip Conveyor
    • Chip Cart
    • Water Gun
    • Air Gun
    • Wash Down Device
    • Worktable Cover (Half Cover)
    • Full Enclosure
  • Measuring System
    • Infrared Tool Breakage Detection
    • Tool Length Measurement System
    • Workpiece Measurement System
  • Oil/Coolant Separator
    • Disc Type Oil/Coolant Separator
    • Machine Oil/Coolant Separation System
  • ATC System
    • Automatic Tool Changer Mechanism (ATC)
    • Taper BT-40
    • Other Specifications ( NBT.BBT.CAT... )
    • Arm Type Tool Magazine 24T
    • Arm Type Tool Magazine 30T
  • 3 Axes Transmission
    • 3-Axes Coolant Thru Ballscrew
    • 3 Axes Roller Type Linear Guideways
    • 3 Axes Linear Scales
    • Z Axis Motor System W/ Brake
    • Z-Axis Counterweight + Central Guiding System
  • Electrical
    • Work Light
    • Alarm Light
    • M30 Automatic Power Off System
    • Heat Exchanger
    • Air Conditioner
    • Front Door Safety System
  • Miscellaneous
    • ZF Gearbox
    • 4th Axis (Rotating Table)
Contact